Page Comparison

...

Bajar el jboss

Editar el archivo <o3>/jboss/server/default/conf/jboss-service.xml y
Buscar (en instalaciones nueva debería esta aprox línea 190)

Code Block

<mbean code="org.jboss.services.binding.ServiceBindingManager"
   name="jboss.system:service=ServiceBindingManager">
   <attribute name="ServerName">ports-default</attribute>
   <attribute name="StoreURL">${jboss.server.home.url}/port-bindings.xml</attribute>
   <attribute name="StoreFactoryClassName">org.jboss.services.binding.XMLServicesStoreFactory</attribute>
</mbean>

Comentar todo, con esto hacemos que JBoss use el juego de puertos por defecto

Code Block

<!--mbean code="org.jboss.services.binding.ServiceBindingManager"
   name="jboss.system:service=ServiceBindingManager">
   <attribute name="ServerName">ports-default</attribute>
   <attribute name="StoreURL">${jboss.server.home.url}/port-bindings.xml</attribute>
   <attribute name="StoreFactoryClassName">org.jboss.services.binding.XMLServicesStoreFactory</attribute>
</mbean-->

Editar el archivo <o3>/jboss/server/default/deploy/ejb3.deployer/META-INF/jboss-service.xml
Buscar:

Code Block

   <mbean code="org.jboss.remoting.transport.Connector"
          name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3">
      <depends>jboss.aop:service=AspectDeployer</depends>
      <attribute name="InvokerLocator">rmi://${jboss.bind.address}:3873</attribute>
         <handlers>
            <handler subsystem="AOP">org.jboss.aspects.remoting.AOPRemotingInvocationHandler</handler>
         </handlers>
   </mbean>

Comentamos

Code Block

   <!--mbean code="org.jboss.remoting.transport.Connector"
          name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3">
      <depends>jboss.aop:service=AspectDeployer</depends>
      <attribute name="InvokerLocator">rmi://${jboss.bind.address}:3873</attribute>
         <handlers>
            <handler subsystem="AOP">org.jboss.aspects.remoting.AOPRemotingInvocationHandler</handler>
         </handlers>
   </mbean-->

A continuación en el mismo archivo buscamos y descomentamos:

Code Block

   <!-- The following is sample configuration for modifying the Connector
   <mbean code="org.jboss.remoting.transport.Connector"
          name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3">
      <depends>jboss.aop:service=AspectDeployer</depends>
      <attribute name="Configuration">
         <config>
            <invoker transport="socket">
               <attribute name="numAcceptThreads">1</attribute>
               <attribute name="maxPoolSize">300</attribute>
               <attribute name="clientMaxPoolSize" isParam="true">50</attribute>
               <attribute name="timeout" isParam="true">60000</attribute>
               <attribute name="serverBindAddress">${jboss.bind.address}</attribute>
               <attribute name="serverBindPort">3873</attribute>
               <attribute name="backlog">200</attribute>
            </invoker>
            <handlers>
               <handler subsystem="AOP">org.jboss.aspects.remoting.AOPRemotingInvocationHandler</handler>
            </handlers>
         </config>
      </attribute>
   </mbean-->

Descomentamos, agregamos 2 líneas y modificamos algunos valores (recomendamos cortar y pegar el código):

Code Block

   <!-- The following is sample configuration for modifying the Connector-->
   <mbean code="org.jboss.remoting.transport.Connector"
          name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3">
      <depends>jboss.aop:service=AspectDeployer</depends>
      <attribute name="Configuration">
         <config>
            <invoker transport="rmi">
               <attribute name="numAcceptThreads">1</attribute>
               <attribute name="maxPoolSize">300</attribute>
               <attribute name="clientMaxPoolSize" isParam="true">50</attribute>
               <attribute name="timeout" isParam="true">0</attribute>
               <attribute name="serverBindAddress">${jboss.bind.address}</attribute>
               <attribute name="serverBindPort">3873</attribute>
<!-- líneas agregadas-->
               <attribute name="clientConnectAddress">mi_webaddress.com</attribute>
               <attribute name="clientConnectPort">3873</attribute>
<!-- líneas agregadas-->
               <attribute name="backlog">200</attribute>
            </invoker>
            <handlers>
               <handler subsystem="AOP">org.jboss.aspects.remoting.AOPRemotingInvocationHandler</handler>
            </handlers>
         </config>
      </attribute>
   </mbean>

El valor de mi_webaddess.com debe ser el nombre (DNS) con que se ve nuestro sitio

Editar el archivo <o3>/jboss/server/default/deploy/jms/uil2-service.xml
Buscar:

Code Block

 <mbean code="org.jboss.mq.il.uil2.UILServerILService"
         name="jboss.mq:service=InvocationLayer,type=UIL2">

    <!-- The server chain -->
    <depends optional-attribute-name="Invoker">jboss.mq:service=Invoker</depends>
    <!-- JNDI binding -->
    <attribute name="ConnectionFactoryJNDIRef">ConnectionFactory</attribute>
    <!-- JNDI binding for XA -->
    <attribute name="XAConnectionFactoryJNDIRef">XAConnectionFactory</attribute>
    <!-- The bind address -->
    <attribute name="BindAddress">${jboss.bind.address}</attribute>
    <!-- The bind port -->
    <attribute name="ServerBindPort">8093</attribute>
    <!-- The ping period in millis -->
    <attribute name="PingPeriod">60000</attribute>
    <!-- Whether tcp/ip does not wait for buffer fills -->
    <attribute name="EnableTcpNoDelay">true</attribute>
    <!-- Used to disconnect the client on the serverside if there is no activity -->
    <!-- Ensure this is greater than the ping period -->
    <attribute name="ReadTimeout">120000</attribute>
    <!-- Used to disconnect the client on the clientside if there is no activity -->
    <!-- Ensure this is greater than the ping period -->
    <attribute name="ClientReadTimeout">120000</attribute>
    <!-- The size of the buffer (in bytes) wrapping the socket -->
    <!-- The buffer is flushed after each request -->
    <attribute name="BufferSize">2048</attribute>
    <!-- Large messages may block the ping/pong -->
    <!-- A pong is simulated after each chunk (in bytes) for both reading and writing -->
    <!-- It must be larger than the buffer size -->
    <attribute name="ChunkSize">1000000</attribute>
  </mbean>

Agregar un linea

Code Block

 <mbean code="org.jboss.mq.il.uil2.UILServerILService"
         name="jboss.mq:service=InvocationLayer,type=UIL2">

    <!-- The server chain -->
    <depends optional-attribute-name="Invoker">jboss.mq:service=Invoker</depends>
    <!-- JNDI binding -->
    <attribute name="ConnectionFactoryJNDIRef">ConnectionFactory</attribute>
    <!-- JNDI binding for XA -->
    <attribute name="XAConnectionFactoryJNDIRef">XAConnectionFactory</attribute>
    <!-- The bind address -->
    <attribute name="BindAddress">${jboss.bind.address}</attribute>
    <!-- The bind port -->
    <attribute name="ServerBindPort">8093</attribute>
    <!-- The ping period in millis -->
    <attribute name="PingPeriod">60000</attribute>
    <!-- Whether tcp/ip does not wait for buffer fills -->
    <attribute name="EnableTcpNoDelay">true</attribute>
    <!-- Used to disconnect the client on the serverside if there is no activity -->
    <!-- Ensure this is greater than the ping period -->
    <attribute name="ReadTimeout">120000</attribute>
    <!-- Used to disconnect the client on the clientside if there is no activity -->
    <!-- Ensure this is greater than the ping period -->
    <attribute name="ClientReadTimeout">120000</attribute>
    <!-- The size of the buffer (in bytes) wrapping the socket -->
    <!-- The buffer is flushed after each request -->
    <attribute name="BufferSize">2048</attribute>
    <!-- Large messages may block the ping/pong -->
    <!-- A pong is simulated after each chunk (in bytes) for both reading and writing -->
    <!-- It must be larger than the buffer size -->
    <attribute name="ChunkSize">1000000</attribute>
<!-- líneas agregada-->
    <attribute name="ConnectAddress">mi_webadddess.com</attribute>
<!-- líneas agregada-->
  </mbean>

Criterio idententico para mi_webaddress

En caso de estar GNU/Linux editar el /ete/hosts de modo que tenga la siguiente línea
Code Block
ip_del_server DNS_externo(mi_webaddess)
Abrir en el firewall los siguientes puertos:
Puerto
Descripción
1099
JNDI
1098
JNDI
3455
EJB3
3873
EJB3 a través de RMI
4446
JWF
5744
RMI IdeaSoft
8093
JMS
Levantar el JBoss

Versions Compared

Old Version 2

New Version 3

Key

Puerto	Descripción
1099	JNDI
1098	JNDI
3455	EJB3
3873	EJB3 a través de RMI
4446	JWF
5744	RMI IdeaSoft
8093	JMS